PBM-30 CNC specifications
Extensive information
We also develop customized 'specials', in line with your wishes and requirements.
Specifications
| Clamping range: | 215 - 780 mm. (8" - 30") |
| Turning range: | 100 - 780 mm |
| Motor: | 400V. - 3 ph. - 7,5 kW. |
| Clamping: | Prism clamping, manual |
| Machining: | Carbide inserts. |
| Max. wall thickness | Unlimited |
| Feed | AAxial / radial electric |
| Feed travel | 200 mm. |
| Turning speed | 50 - 150 rpm |
| Measurements | 3500 x 2400 x 1800 mm. |
| Weight | 5000 kg |
| Cooling pump | Built-in |
| Documentation | PDF Download |
MORE INFORMATION
SIMPLE
The pipe is clamped with a self-centering prism clamp (for which no spare parts are needed). The prism clamp can handle the entire clamping range of the machine. The specially developed chisel set allows the machining of all pipe sizes within the range of the machine. Without having to adjust chisels again and again.
EXACTLY
Thanks to the stability of the machines, every finishing operation is the same. This promotes the welding result, which is of the greatest importance when welding with, for example, a welding robot.
FAST
The table below gives a few processing times that were measured during the making of a weld seam pre-treatment of 30 °. Naturally, several types of final operations can be performed. It is also possible to do a combination of different final edits simultaneously.
| pipe diameter | Wall thickness | Material | Processing time | |||
| 4" | - | 114,3 mm. | 6 | mm. | St. 37 | ca. 15 sec. |
| 6" | - | 168,3 mm. | 12 | mm. | St. 37 | ca. 30 sec. |
| 6" | - | 168,3 mm. | 25 | mm. | St. 37 | ca. 1 min. |
| 10" | - | 273,0 mm. | 19 | mm. | Duplex - r.v.st. | ca. 2 min. |
| 12" | - | 323,9 mm. | 12 | mm. | Duplex - r.v.st. | ca. 1 min. |
| 16" | - | 406,4 mm. | 13 | mm. | St.37 | ca. 45 sec. |
| 20" | - | 508,0 mm. | 20 | mm. | Duplex - r.v.st. | ca. 1 min. |
| 24" | - | 609,6 mm. | 25 | mm. | Duplex - r.v.st. | ca. 1,5 min. |
